Recommended Paper; Handling And Storing Paper - Toshiba e-Studio 281c Operator's Manual For Basic Function

4.Setting Copy Paper (Cont.)

Recommended paper

1
To make copies with a fine color image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
Paper type
Plain paper
Thick
Sticker labels
*1
OHP film
*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.

Handling and storing paper

Pay attention to the following points:
• Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
• Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
• Paper should be wrapped in its wrapping and stored in a damp-free place.
• To prevent paper from being folded or bent, store it evenly on a flat surface.
48
1.BEFORE USING EQUIPMENT
Toshiba recommendations/Manufacturer
TIDAL MP/Hammermill (20 lb. Bond)
Laser/Hammermill
Exact Index/WAUSAU
5165/Avery
CG3700/3M
(24 lb. Bond)
(32 lb. Bond)
(90 lb. Index)
(110 lb. Index)
Mode
PLAIN
THICK1
THICK2
THICK2
THICK3
THICK3
OHP FILM