DECELERATION
Release the accelerator. Gently press the decelerator to slow down.
The deeper you press, the greater is the deceleration.
Pushing too hard will not increase the braking forse and may cause
damage to the brake system and might make the device out-of-
control.
After turning-on the electric kickscooter, verify the level of the battery
power on the display, and put one foot on the pedal.
Stand on pedal with one leg only.
Keep the other foot on the ground and activate the accelerator.
Press the speed button on the right handle to accelerate.
Step on with the other foot whilst the kickscooter is moving.
Select the appropriate speed for the ground.
Release the accelerator button to slow-down.
Press the brake to brake.
When desired, but mainly when driving at high speed, you can use
the rear wheel brake system (put the feet on the bumper of the rear
wheel).
Stop the kickscooter and remove the feet, one by one.
12