Using Dlna Network Service - Telefunken TFL65FHD200BC Operating Instructions Manual

Colour television with remote control. 65” wide screen led digi tv

Hide thumbs

Table of Contents

Available languages

• You must change your modem's SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use

a wired connection if you experience problems with a

wireless connection.

Configuring Wireless Device Settings

Open the Network Settings menu and select Network

Type as Wireless Device to start connection process.

Press the YELLOW button to scan the wireless

networks. A list of available networks will be displayed.

Please select your desired network from the list.

Note: If the modem supports N mode, you should set

N mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual

keyboard. You can use this keyboard via the navigation

buttons and the OK button on the remote control.

Wait until the IP address is shown on the screen.

This means that the connection is now established. To

disconnect from a wireless network press OK.

You can navigate between menu tabs by pressing left/

right buttons. The help bar on the bottom of the dialog

shows features that you may use. Press the BLUE

button to check your internet connection speed. Press

the GREEN button to switch to advanced mode and

then press the OK button to edit settings.

You can check the signal strenght by using the network

settings menu for the wireless device mode.

Other Information

Configuration Status: Displays Wi-Fi status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks' name will be

displayed.

Delete Saved Wi-Fi Profiles

Saved profiles will be deleted if you press the RED

button while the wireless device selection OSD is on

the screen.

Connecting to your mobile Phone via WiFi

• If your mobile phone has WiFi feature, you can

connect your mobile phone to your TV by using a

WiFi connection via a router, in order to play content

from your phone. For this, your mobile phone must

have an appropriate sharing software.

• Connect to your router following the steps stated

above in the Wireless Connection section.

• Afterwards, engage your mobile phone with the router

and then activate the sharing software on your mobile

phone. Then, select files that you would like to share

with your TV.

• If the connection is established correctly, you should

now be able to access the shared files from your

mobile phone via the Media Browser of your TV.

• Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile phone and press the OK button to continue.

• A virtual remote controller application could

be available for download in your smartphone

application providers server. Not all smartphones

are supported by this application.

Note: This feature may not be supported on all mobile

phones.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any firewalls of your network allow

the TV wireless connection.

• Try searching for wireless networks again, using the

Network Settings menu screen.

If the wireless network does not function properly,

try using the wired network in your home. Refer to

the Wired Connection section for more information

on the process.

If the TV does not function using the wired

connection, check the modem (router). If the

router does not have a problem, check the internet

connection of your modem.

Connection is Slow

See the instruction book of your wireless modem to get

information on the internal service area, connection

speed, signal quality and other settings. You need to

have a high speed connection for your modem.

Distruption during playback or slow

reactions

You could try the following in such a case:

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other Wi-Fi compatible devices. Try changing the

active channel on the WLAN router.