⃝ RF OUT
11
⃝ S/PDIF
12
⃝ USB
13
⃝ RS-232
14
Table 2.3: Connectors specification
TV SCART
VCR SCART
S-Video
RCA AV
S/PDIF
RS-232
USB
2.4 Connecting the digital receiver
There are several ways to install the digital receiver as de-
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
You should configure audio and video settings after installa-
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.
2.4 Connecting the digital receiver 11
Analog television output socket.
Dolby Digital output socket for the au-
dio system.
USB port for firmware update and data
transfer.
Serial port for firmware update and data
transfer.
CVBS / S-Video / RGB / YUV video output
Left & right audio output
CVBS video output
Left & right audio output
CVBS / S-Video / RGB / YUV video input for bypass
Left & right audio input for bypass
S-Video output
Composite video output
Left & right audio output
Dolby Digital audio output
9 pin D-sub type
Transfer rate: 115.2 kbps at maximum
2.0 Device