1.2 Controlling the digital receiver
You can control the digital receiver with the remote control
and the front panel buttons.
NOTE
1.2.1 The front panel
STANDBY button
CHANNEL
VOLUME
Status display
1.2 Controlling the digital receiver 3
When the digital receiver is off but plugged to a wall
outlet, we say that it is in standby mode; on the other
hand, when it is on, it is in operation mode. You should
keep the digital receiver plugged to a wall outlet so as
it can run timer events.
toggles the digital receiver between oper-
ation mode and standby mode.
,
buttons
switch to another service, and move
the highlight bar vertically in a menu.
,
buttons
change the volume, and select an
option in a menu.
displays a current time in standby mode, and
displays a current status of the digital receiver in op-
eration mode.