Transferring The Receiver Data - Topfield TF 5000 User Manual

58 Firmware Update and Data Transfer
To update firmware with this method, perform the following
steps:
1.
2.
3.

9.2 Transferring the receiver data

The digital receiver retains such data as follows:
•
•
•
It is possible to transfer receiver data to the digital receiver
from another same digital receiver connecting them with a
RS232 cable.
To transfer receiver data, perform the following steps:
1.
2.
3.
NOTE
Plug a RS232 cable into the RS-232 port on the digital
receiver and the other's.
Turn both of them on.
Select the Installation > Transfer Firmware > Transfer
Firmware to Other IRD menu.
Service list
Favorite list
Preference settings
Plug a RS232 cable into the RS-232 port on the digital
receiver and the other's.
Turn both of them on.
Select the Installation > Transfer Firmware > Transfer
Data to Other IRD menu.
All of preference settings are transferred together with
service information when transferring receiver data.
This means that you will lose all of your own data. So
You had better memorize some important data such
as video settings before starting transfer to avoid re-
setting them.