Table of Contents
Advertisement
6.3
Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display.
button
. The number will be dialled automatically.
6.4
Erasing one or all number from the Call list
Scroll through the Call list until the desired number is shown on the display.
short to erase the current entry or press and hold the Mute button
call list.
6.5
Store a number from the call log into the memory
Scroll through the Call list until the desired number is shown on the display.
button
for 3 sec.
to see which entry is still empty (0-9)
the number.
Edit the number if needed and press the program button
back to standby.
7
Register a handset
7.1
Register to a Topcom Diablo base
You can subscribe 5 handsets to one base unit. By default, each handset is subscribed on the base unit
upon delivery.
You only need to subscribe the handset if:
•
The handset subscription has been removed from the base unit (e.g. for reinitialisation)
•
You want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Diablo handset and base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator
on the base unit begins to blink rapidly. The Line/Charge indicator
During this minute, the base unit is in register mode and you must do the following to subscribe the
handset:
Press and hold the Program
The handset is now searching for the base. When a base is found the handset will ask to enter the pin-
code 'P1-_'. Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching for
the base.
When the handset is registered, it will show the handset number followed by the time.
8
Call transfer and Intercom between two handsets
These functions only work when more then one handset (like a Twin/Triple/Quattro
version) is registered to the base!
8.1
Call transfer and conference call during an external call
During an external call, press and hold the INT key until INT appears . Press the number (1-5) of the
other handset.
The other handset will start to ring:
–
When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press the '#'-key you can talk with the 2nd handset and external line at the same time
(conference call)
–
Or press and hold the INT key again to return to the external call.
Press the On-hook button
Topcom Diablo 150/Twin/Triple/Quattro
The memory will be shown and you can scroll through it with the scroll keys
Enter the memory location (0-9) where you want to store
key for 6 sec until there is a '-' scrolling on the screen from left to right.
to end the call.
Topcom Diablo 150/Twin/Triple/Quattro
Press the Off-hook
Press the Mute button
for 3 sec. to erase the compleet
Press and program
again to confirm and to go
will blink rapidly for one minute.
7
Advertisement
Table of Contents
