Epson Stylus TX410 Start Here page 3

6
Install software
Your software works with Windows
Windows Vista , and Mac OS X 10.3.9, 10.4.x – 10.5.x.
® ®
Windows
1
Make sure the printer is NOT CONNECTED
to your computer.
Note:
If you see a Found New Hardware
Cancel
screen, click and disconnect the
USB cable. You can't install your software
that way.
2
Insert the Epson Stylus TX410 software CD.
With Windows Vista, if you see the AutoPlay
window, click Run Setup.exe. When you
see the User Account Control screen,
click Continue.
3
Select English.
4
Click Install and follow the on-screen instructions.
5
When prompted, connect the USB cable. Use any open port on
your computer.
Note:
If installation doesn't continue after a moment, make sure you securely
connected and turned on the printer.
6
Follow the on-screen instructions to install the rest of the software.
7
When you're done, remove the CD.
You're ready to print, copy, and scan! See your on-screen User's Guide for
instructions.
2000, XP, XP Professional x64 Edition,
®
Macintosh
®
1
Make sure the printer is NOT CONNECTED
to your computer.
2
Insert the Epson Stylus TX410 software CD.
3
Double-click the Epson icon.
4
Click Install and follow the on-screen instructions.
5
When prompted, connect the USB cable. Use any open USB port on your
Macintosh. Make sure the printer is securely connected and turned on.
6
If you're using Mac OS X 10.5.x, skip to step 10.
If you're using Mac OS X 10.3.9 or 10.4.x, continue with the next step.
7
When you see this screen, click Add Printer.
8
Follow the steps on the right of the screen to add the printer.
9
Click Next again, if necessary.
10
Follow the on-screen instructions to install the rest of the software.
11
When you're done, eject the CD.
You're ready to print, copy, and scan! See your on-screen User's Guide for
instructions.