Removing The Rack Front Cover - Fujitsu PRIMERGY TX150 S6 Options Manual

Rack model
4.2.2

Removing the rack front cover

The rack front cover has to be removed before installing further accessible
drives.
1
Figure 10: Removing the rack front cover
Ê Remove two knurled screws on either side (1).
Ê Remove the rack front cover to the front (2).
Figure 11: Removing the plastic front cover
Ê Disengage the three latches (1-3) on the top side one after the other and pull
out the plastic front cover approxiate 2 cm (4).
Ê Press the three hooks (5-7) on the bottom side, carefully pull out on the
plastic front cover and remove it to the front (8).
28
3
2
Options Guide
Preparation
2
1
4
5
8
6
7
1
TX150 S6