Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7403-K112
Summary of Contents for NCR 7403-K112
- Page 1 7403‐K112 Wireless USB Extension Cable Kit Instructions Issue C ...
-
Page 2: Revision Record
Revision Record Issue Date Remarks A Mar 2009 First issue B Mar 2010 New Wireless device C June 2011 Added 7610/7611 Support ... - Page 3 Introduction This kit provides a USB Extension Cable and Velcro strips that are used to integrate a Wireless USB Client in the RealPOS 70xrt (7403), RealPOS 25 (7610), and RealPOS 50 (7611) terminals. USB Extension Cable 497-0464532 Reclosable Loop Fastener 497-0459601 Reclosable Hook Fastener 497-0459602 FCC Label 497-0462138 ...
- Page 4 There are two versions of the Wireless USB Client: 2330‐K370 (U.S. Only) 2330‐K371 (International) The Wireless USB Client kit contains the following: USB Client USB Client Stand with Cable 1.5 m Cable (not used in an integrated configuration) CD‐ROM containing software driver and documentation ORiNOCO ® 802.11a/b/g/n USB Adapter with Cap USB Cradle CD containing software, drivers and documentation Printed Quick Install Guide ...
-
Page 5: Installation Procedures
Installation Procedures (7403) The wireless device connects to a dedicated USB port in the 7403 display head. 1. Loosen the captive screws (2) that secure the Top Access Cover. 2. Remove the cover from the Rear Cabinet. Top Access Cover 27308 3. Install the Hook and Loop Fasteners (Velcro). a. Adhere the Hook Fastener to the back side of the Wireless Client. Velcro Hook Fastener ... - Page 6 b. Adhere the Loop Fastener to the Rear Cabinet. c. Adhere the FCC Label to the Rear Cabinet. Velcro Loop Fastener FCC Label 27312 4. Connect the Wireless USB Extension Cable to the Wireless Client. Note: The USB Client Stand w/1.5 m Cable is not used and can be discarded. Wireless USB Extender Cable Wireless Client ...
- Page 7 5. Fasten the Wireless Client to the Rear Cabinet using the Velcro strips. 6. Connect the Wireless USB Extension Cable to the 7403 USB port. 7403 USB Port 7. Replace the Top Access Cover. ...
- Page 8 Installation Procedures (7610/7611) The wireless device connects to a dedicated USB port on the terminal. 1. Open the Terminal Cable Cover. Press the Cable Cover Tabs (2) and pivot the cover open. Cable Cover Tabs 29242 ...
- Page 9 2. Adhere the Velcro Loop Fastener to the Terminal Cable Cover as shown. Velcro Loop Fastener 29806 3. Adhere the FCC Label on the Terminal Back Cover as shown. Certificate of Authenticity Label FCC Label Certification Label Certificate of Authenticity Label (Large) (Small) 29238...
- Page 10 4. Adhere the Velcro Hook Fastener to the back side of the Wireless Client. Velcro Hook Fastener 5. Connect the Wireless USB Extension Cable to the Wireless Client. Note: The USB Client Stand w/1.5 m Cable is not used and can be discarded. Wireless USB Extender Cable Wireless Client 6. Fasten the Wireless Client to the Terminal Cable Cover using the Velcro strips. 29807...
- Page 11 7. Connect the Wireless USB Extension Cable to the terminal USB port. USB Ports 29808 8. Close the Terminal Cable Cover. ...
-
Page 12: Installing The Software
Installing the Software See the Quick Start User’s Guide on the CD‐ROM to complete the Wireless Client installation. Error Message Some NCR Gold Images have a service disabled that is required to run the Wireless Client. If you get the following message when trying to configure the network connection you need to start the Wireless Zero Configuration service. To enable the service: Select Start Control Panel Administrative Tools Services. - Page 13 2. Scroll down and double‐click on Wireless Zero Configuration to open up the Properties window. 3. Set the Start‐up Type option to start the service Automatically. ...