Internal Call (Intercom); Reset Of The Handset; Troubleshooting - Topcom BUTLER 1600 User Manual

Topcom Butler 1600Twin/Triple/Quattro
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
Press the Line button
9.2

Internal call (intercom)

• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the Line
button .
• If the other handset answers the call by pressing the Line button
internally.
• Press the Line button

10 Reset of the handset

This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press Menu button
Enter the pin code (0000) and press OK
Default handset settings are:
Handset volume
Handset melody
Flash time
Dial mode
All memories (redial, phonebook, call log,...) and handset name will not be
erased!

11 Troubleshooting

Problem
No Display
No dialling tone
Volume of conversation
partner too low
Handset ringer volume too low
Not possible to dial a number
16
to end the call.
to end the call.
Use the Right button to scroll to 'RESET' and press OK
3
9
Short
Tone
Possible cause
Batteries not charged
Telephone cable not
properly connected
Wrong dial mode
The unit will go back to standby.
Solution
Check the position of the
batteries
Recharge the batteries
Check the connection
of the telephone cable
Adjust the volume during the
conversation by pressing the
volume key
Adjust the ringer volume
See "Setting the dialling mode"
to set the correct dial mode
Topcom Butler 1600/Twin/Triple/Quattro
you can talk