Mute Function; Setting The Volume; Paging; Flash Button (R) - Topcom BUTLER 1600 User Manual

Topcom Butler 1600Twin/Triple/Quattro
When you are calling in hands free mode and you want to change the
volume, press the Volume button.
When you use the hands free function for a long time, the batteries will be
discharged faster !
5.6

Mute function

It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
Press the Mute button
MUTE symbol . appears on the display.
to continue the conversation.
5.7

Setting the volume

During a conversation you can set the volume by pressing the Volume button
set the volume alternatively in between 1-5. You can also use the left/right button.
The hands free receiver volume is also adjustable as above described!
5.8

Paging

When you press the Paging button
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9

Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press and hold the redial button
'Short' for 100ms or 'Long' for 250ms
from the display

5.10 Setting the ring volume and melody

5.10.1 Handset melody
Press and hold the melody button
melody (1-9) by means of the scroll keys
10
during a conversation. The microphone will be deactivated. The
on the base unit, the handset emits a ringing signal for
for 3 sec.
The flash time setting will disappear after 2 sec.
until the current melody is heard.
Press the Mute button
The display will show:
. Press again to confirm the setting.
Topcom Butler 1600/Twin/Triple/Quattro
again when you want
. You can
Select the desired