Worcester Comfort+ II RF Installation And Operating Instructions Manual page 7

The control unit must not be directly influenced by radiators or
heat-emitting objects, such as TVs or table lamps.
600 ≥ 1000
°C
°F
°C
°F
Fig. 4 Installation location of the control unit
Fig. 5 Wireless range
Comfort+ II RF – 6720886122 (2018/07)
°C
°F
0010021101-001
°C
°F
°C
°F
0010021103-002
Releasing control unit from wall socket
2.
Fig. 6 Releasing control unit from wall socket
▶ Insert a screwdriver into the recess on the underside of the
control unit.
▶ Gently turn the screwdriver, until the locking device opens.
Wall-mounted installation
Find a position with good signal strength before starting the
wall-mounted installation of the control unit.
If the signal is weak, try another position in the room, until the
best possible signal strength is achieved ( Section "Display
wireless signal strength", page 13).
▶ Use the wall socket as a template to mark the position of the
screws.
▶ Drill two suitable holes for the length and diameter of the
rawl plugs.
Fig. 7 Installing the wall socket for the control unit
▶ Insert the rawl plugs.
▶ Insert the screws in such a way, that they protrude
sufficiently to enable the wall socket to fit behind the screw
heads.
▶ Install the wall socket horizontally.
Installation and commissioning
1.
0 010 010 085-001
6720810965-08.1Wo
7