Settings - Worcester Comfort+ II RF Installation And Operating Instructions Manual

Display wireless signal strength
▶ Turn the selector to select Signal strength.
▶ Press the selector.
The signal strength is displayed as a number from 0 to 10.
0 = No reception
1 - 3 = Poor reception
4 - 6 = Good reception
7 - 10 = Very good reception
Do not display the signal strength for too long as this quickly
depletes the batteries.
5.6

Settings

▶ Select the "Settings"
The following menu items are available in the "Settings" menu:
• Language (default setting EN)
• Time/date
• Format
– Date format (default setting: DD.MM.YYYY)
– Time format
– Sensor calib.(default setting: 0.0 °C)
– Contrast (default setting: 10)
• Reset all
Setting the language
▶ Turn the selector to select Language.
▶ Press the selector.
▶ Turn the selector to select a language:
– EN (English)
– FR (French)
▶ Press the selector.
Setting the time
▶ Turn the selector to select Time/date.
▶ Press the selector.
Clock time is displayed.
▶ Press the selector.
The hours display flashes.
▶ Turn the selector if necessary to set the hour.
▶ Press the selector.
The minutes display flashes.
▶ Turn the selector if necessary to set the minutes.
▶ Press the selector.
Comfort+ II RF – 6720886122 (2018/07)
symbol in the main menu.
Setting the date
▶ Turn the selector to select Time/date.
▶ Press the selector.
Clock time is displayed.
▶ Turn the selector to select Date.
▶ Press the selector.
The day flashes.
▶ Turn the selector if necessary to set the day.
▶ Press the selector.
The month flashes.
▶ Turn the selector if necessary to set the month.
▶ Press the selector.
The year flashes.
▶ Turn the selector if necessary to set the year.
▶ Press the selector.
▶ Turn the selector to select DST.
▶ Press the selector.
▶ Turn the selector to select ON or OFF.
▶ Press the selector.
Setting Date format
▶ Turn the selector to select Format.
▶ Press the selector.
▶ Turn the selector to select Date format.
▶ Press the selector.
▶ Turn the selector to select DD.MM.YYYY or MM/DD/YYYY.
▶ Press the selector.
Date format is displayed after a few seconds.
Setting Time format
▶ Turn the selector to select Format.
▶ Press the selector.
▶ Turn the selector to select Time format.
▶ Press the selector.
▶ Turn the selector to select 12 or 24-hour format.
▶ Press the selector.
Time format is displayed after a few seconds.
Setting Sensor calib.
If the displayed room temperature is incorrect, a calibration of
up to ± 3 °C can be set.
▶ Turn the selector to select Format.
▶ Press the selector.
▶ Turn the selector to select Sensor calib..
The set sensor calibration is displayed.
▶ Press the selector.
The set sensor calibration flashes.
▶ Turn the selector to set the sensor calibration.
▶ Press the selector.
Settings in the main menu
13