Topcom Skyr@cer 544 Quick Installation Manual page 9

HL_Skyr@cerAP544.book Page 9 Wednesday, February 12, 2003 3:19 PM
AP Name : Name of the AP, which can be used to identify the Access Point among the all the
Access Points in the wireless network.
SSID : Service Set Identifier, which is a unique name shared among all clients and nodes in
a wireless network. The SSID must be identical for each clients and nodes in the
wireless network.
Channel : The value of channel that AP will operate in. You can select the channel range of
1 to 13.
WEP Key : To disable WEP security, click on the "Disable" option. To enable WEP security, there
are 3 type of WEP keys to choose from, 64bits, 128bits and 256bits. When one of the
3 WEP key options is selected, you must enter the value of one of the four Keys in
ASCII or HEX format. You can also enter the values for all four WEP keys, and select
one to use.
Note! When AP's WEP security is enabled, all the wireless clients that wish to
connect to the Access Point must also have WEP enabled with the identical WEP Key
value entered.
For the changes made to any of the items above to be effective, click "Apply".
The new settings are now been saved to Access Point and will be effective once the Access Point
restarts.
Click " Back " to go back to Basic Setting page.
Skyr@cer Access Point 544
ENGLISH
9