Ip Setting; Wep Setting - Topcom Skyr@cer 544 Quick Installation Manual

HL_Skyr@cerAP544.book Page 24 Wednesday, February 12, 2003 3:19 PM
ENGLISH

4.2.3. IP SETTING

This is the page where you configure the IP settings for the Access Point.
Select "Fixed IP
Address" and enter the
IP address of the
Access Point and
Gateway.
Select "DHCP Client" if
there is a DHCP server
assigning IP addresses
on the network.
Please also refer to Appendix B to learn more about Network and IP address.
Click " Apply " button for any changes made to be effective. The utility program will prompt you for
user name and password for security protection.

4.2.4. WEP SETTING

This is the page that allows you to configure the WEP settings for the Access Point.
Enable WEP Key
security by clicking
"Data Encryption" .
24 Skyr@cer Access Point 544