HL_Skyr@cerAP544.book Page 21 Wednesday, February 12, 2003 3:19 PM
4.2. MANAGE AND CONFIGURE AP WITH AP 22M UTILITY
The AP 22M Utility can be useful in a way that allows you to configure one AP to another to save
the trouble of logging into the web configuration utility of each AP. However, all the Access Points
that you wish to configure using AP 22M Utility must be in the same network domain as your PC's.
4.2.1. LINK INFORMATION
This is the default page when AP 22M Utility starts up.
Status – displays the basic settings of the selected Access Point.
Available AP – lists all the 22mpbs Access Point of the same network domain detected
on the network. You can select a particular Access Point from the list to view and change
its configuration.
Skyr@cer Access Point 544
ENGLISH
21