Status Page; Basic Setting - Topcom Skyr@cer 544 Quick Installation Manual

HL_Skyr@cerAP544.book Page 8 Wednesday, February 12, 2003 3:19 PM
ENGLISH

3.1.1. STATUS PAGE

This page displays the following information.
Firmware Version : Shows the current firmware version
LAN : Shows the Mac address, IP address (default: 192.168.1.1), Subnet Mask,
Gateway Address. The current LAN traffic calculated in terms of number of
packets sent and received by AP through wired connection is also displayed.
Wireless : Shows the Mac address, current ESSID, the status of Encryption Function
(Enable or Disable). the current using channel. The current wireless traffic
calculated in terms of number of packets sent and received by AP through
wireless communication is also displayed.
View Log : Upon clicked, the page will change to log page. The log page records every
event and the time that it happens.
You may clear the entries recorded in the log by clicking the " Clear Log " button, and refresh the
screen to show the latest log entries by clicking the " Refresh " button.

3.1.2. BASIC SETTING

This is the page where you can change the basic settings of the Access Point with the minimum
amount of effort to adjust a secure wireless network.
8 Skyr@cer Access Point 544