Charging The Headset; Put On The Headset - Topcom BUTLER 300 DECT User Manual

B300_all Page 4 Tuesday, July 15, 2003 3:57 PM
Topcom Butler 300 Dect Headset
7) Ear hook
8) Indicator LED
9) Increase volume
10) Decrease volume

3. CHARGING THE HEADSET

Before you use the Butler 300 Headset for the first
time, you must make sure that the batteries are
charged for 6-8 hours. The headset will not work
optimally if not properly charged!!
To charge the battery you have to put the power
adaptor jack into the headset charge socket(4) as
shown.
The RED indication LED will lit during charging.
When it starts to blink the battery is fully charged.

4. PUT ON THE HEADSET

• Press against the ear hook to move it further away from the headset as shown
• Put the headset with the ear hook behind the ear..
• Make sure the microphone is pointing towards your mouth
Remark: The ear hook opening can be slightly bend to make it perfect fit
around the ear.
4
4
Topcom Butler 300 Dect Headset