Setting Pause Time; Paging - Topcom MIRA 100 Operating Manual

3. Enter the code number 3719 ("SET BABYCALL" appears on the display).
4. Enter the desired telephone number.
5. Press the set button ("DONE" appears on the display).
6. Press the line button to stop the radio connection.
8.12.2. ACTIVATE BABYCALL
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
3. First press the number "1" and then the
play together with the programmed babycall number. The babycall function is
now activated and the handset is in standby mode).
The automatic dialling is done when you first press the line button
any button (except the set button ). You hear 2 short warning beeps to indi-
cate that the programmed babycall number is dialled automatically.
Important:
This function can only be activated if a babycall number has been programmed.
8.12.3. DEACTIVATE BABYCALL
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display). The babycall number is
not dialled.
3. Press the number "1" and then the # button ("BABY OFF" appears short on
the display and then the handset is in standby mode).

8.13. SETTING PAUSE TIME

If your Mira 100 is connected to a house telephone exchange, we advise you to
program a pause in the memory numbers after asking access to the external line
(see 8.10.1. Storing memory numbers).
Standard the pause time is set to 3 seconds, but this can be changed in the
following way:
16
Mira 100
button (" " appears on the dis-
and then
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
3. Enter the code number:
codenumber 461 = 1 second pause
codenumber 462 = 2 seconds pause
codenumber 463 = 3 seconds pause (standard)
codenumber 464 = 4 seconds pause
4. Press the line button to stop the radio connection.
If you wish to enter a pause when storing a memory number, press the redial
button . The pause will last as long as you have programmed it.

8.14. PAGING

With this function you can call the handset from the base station and vice versa.
Press the paging button of the base station. When the radio connection is
established, the handset will emit a ringer sound and "PAGE" appears on the dis-
play. Press the line button to interrupt the ringer sound. If you press the line
button again, the radio connection is broken.
You can also call the base station from the handset. Proceed as follows:
1. Press the line button and wait for the radio connection to be established
(dial tone).
2. Press the set button ("SET" appears on the display).
3. Press the number "5". The base station will ring.
4. Press the line button .
Remark:
This function does not allow you to have a conversation between the base sta-
tion and the handset. Only the ringer sound can be activated.
17
Mira 100