Setting Pause Time; Paging; Mira 200; Operation Digital Answering Machine - Topcom MIRA 200 Operating Manual

8.13. SETTING PAUSE TIME

If your Mira 200 is connected to a house telephone exchange, we advise you to
program a pause in the memory numbers after asking access to the external line
(see 8.10.1. Storing memory numbers).
Standard the pause time is set to 3 seconds, but this can be changed in the
following way:
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
3. Enter the code number:
codenumber 461 = 1 second pause
codenumber 462 = 2 seconds pause
codenumber 463 = 3 seconds pause (standard)
codenumber 464 = 4 seconds pause
4. Press the line button to stop the radio connection.
If you wish to enter a pause when storing a memory number, press the redial
button . The pause will last as long as you have programmed it.

8.14. PAGING

With this function you can call the handset from the base station and vice versa.
Press the paging button of the base station. When the radio connection is
established, the handset will emit a ringer sound and "PAGE" appears on the dis-
play. Press the line button to interrupt the ringer sound. If you press the line
button again, the radio connection is broken.
You can also call the base station from the handset. Proceed as follows:
1. Press the line button and wait for the radio connection to be established
(dial tone).
2. Press the set button ("SET" appears on the display).
3. Press the number "5". The base station will ring.
4. Press the line button .
18

Mira 200

Remark:
This function does not allow you to have a conversation between the base sta-
tion and the handset. Only the ringer sound can be activated.
8.15. RINGER VOLUME CONTROL
The ringer volume of the handset and the base station can be set by means of a
ringer volume switch. On the right side of the base station you will see a switch
with 3 positions. On the handset a switch with 2 positions is present on the right
side (front of handset facing you).
9. OPERATION DIGITAL ANSWERING
MACHINE
The built-in digital answering machine in the Mira 200 is a very sophisticated device
which offers you a whole range of possibilities. Please read through this operating
guide carefully in order to be able to use the device without any problem.

9.1. SOME TERMS

OGM = This text, which you have recorded, is announced to
(outgoing message) the caller during your absence.
MEMO = Instead of leaving written memo messages for the
(memorandum message) members of your household, you can record memo
messages on your Mira 200.
An-mode = After the playback of outgoing message 1, the caller
has the possibility to leave a message.
n A - m o d e = After the playback of outgoing message 2, the con-
nection is broken automatically. The caller does not
have the possibility to leave a message.
19
Mira 200