Call Barring; Babycall (Emergency Call) - Topcom MIRA 100 Operating Manual

8.10.2. DIALLING A MEMORY NUMBER
1. Press the line button and wait for the dial tone.
2. Press the memory button ("SPEED DIAL" appears on the display).
3. Press the number of the memory place, where the telephone number has been
stored (0-9). The telephone number is now automatically dialled.
8.10.3. SEARCHING A MEMORY NUMBER
1. Press the line button and wait for the dial tone.
2. Press the memory button ("SPEED DIAL" appears on the display).
3. Press the button to see the following number or the # to see the previous
number.
You can dial a memory number while going through the memory numbers by
pressing the redial button when the desired number appears on the display.
8.10.4. ERASING A MEMORY NUMBER
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
3. Press the memory button ("SPEED DIAL" appears on the display).
4. Press the number of the memory place (0-9) of the memory number you wish
to erase.
5. Press the set button ("DONE" appears on the display).
6. Press the line button to stop the radio connection.

8.11. CALL BARRING

The numerical buttons of the Mira 100 can be locked electronically so that out-
going calls are not possible any more.
14
Mira 100
8.11.1. ACTIVATE CALL BARRING
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
3. First press the number "3" and then the
the display and then, until the electronic lock is deactivated, " " is present on
the display).
4. Press the line button to stop the radio connection.
If you now first press the line button
hear a long warning tone to indicate that the electronic lock of the numerical but-
tons is activated.
Remark:
If the Mira 100 is connected to a house telephone exchange, incoming lines can
still be put through, even when the electronic lock is activated.
8.11.2. DEACTIVATE CALL BARRING
1. First press the line button and wait for the dial tone ("LOCKED " appears
on the display).
2. Press the set button .
3. Press the number "3" and then the # button ("
"UNLOCK" appears on the display).
4. Press the line button .

8.12. BABYCALL (EMERGENCY CALL)

Thanks to the babycall function you can program the Mira 100 so that a prepro-
grammed telephone number is dialled when pressing any button.
8.12.1. ENTERING A BABYCALL NUMBER
1. Press the line button and wait for the dial tone.
2. Press the set button ("SET" appears on the display).
15
Mira 100
button (first "LOCKED" appears on
and then any other button, you will
" disappears and now