Erasing All Numbers And Name From The Phonebook; Speed Dial Numbers; Store Speed Dial Number; Recall Speed Dial Number - Topcom BUTLER 5020 User Manual

Topcom cordless phone user guide
Table of Contents

Advertisement

Available languages

Available languages

Butler 5020
- Press OK to confirm, the selected name and/or number is displayed again.
- Press OK to re-confirm and go back to the Phonebook.
- Press ESC to leave the phonebook.
4.7.

Erasing all numbers and name from the Phonebook

- Press the PHONEBOOK button
- Press OPT.
- Select DELETE ALL by using the UP and DOWN keys.
- Press OK to confirm, the display will indicate SURE?
- Press OK to re-confirm. EMPTY appears on the display or press ESC if you don't want to erase all
entries.
- Press ESC to leave the phonebook.
4.8.

Speed dial numbers

10 speed dial numbers can be assigned to a stored number in the Phonebook. A phonebook number
will be stored under a number key.

4.8.1. Store speed dial number

- Press the PHONEBOOK button
- Select entry to store as speed dial number via up and down keys.
- Press OPT.
- Select SPEED DIAL and press OK.
- Select NEW and press OK.
- You now get an overview of the free speed dial keys: #: ----------.
- Press a number key where to store this phonebook number (example key: 5 #: ----5----).
- Press the OK key to confirm.
- Press ESC to leave the phonebook.
The speed dial number will appear in front of the telephone number in the Phonebook.

4.8.2. Recall speed dial number

- Press and hold the numeric key for 3 sec where you stored the speed dial number.
- The stored number will be displayed.
- Press the LINE key to dial this number.

5. HANDSET SETTINGS

5.1.

Keypad Lock

- Press MENU when the unit is in standby mode..
- Select KEY LOCK by using the UP and DOWN keys.
- Press OK to confirm.
The display shows DIAL 080. The keypad is now locked.
After dialing 080,the keypad will be released.
5.2.

Ringer volume

- Press MENU when the unit is in standby mode..
- Select RING SIGNAL by using the UP and DOWN keys.
- Press OK to confirm.
when the unit is in standby mode..
when the unit is in standby mode..
54

Advertisement

Table of Contents
loading

Table of Contents