Power Supply Connection - Yamaha PC412-D Owner's Manual

Hide thumbs Also See for PC412-D:

Table of Contents

4.6. Power supply connection

WARNING

You must use the included power cord. Do not use the included power cord with any other product. Doing

so may cause malfunction, overheating, and fire.

NOTICE

• Position the power cord so that the rear exhaust does not contact it directly. The temperature of the

rear exhaust might cause the power cord to deform.

1. Connect the included power cord.

First connect the power cord to the unit, and then connect the power plug to an electrical outlet.

When connecting the power cord, insert it all the way, and then twist it clockwise until you hear the click.

When removing the power cord, pull the latch toward yourself, turn the connector counterclockwise, and

remove it.

NOTE

• Turning the unit on and off in rapid succession by connecting and disconnecting the power plug can

cause it to malfunction. After turning the unit off by disconnecting the power plug, wait for at least

five seconds before reconnecting the power plug to turn the unit on.

PC412-D PC412-DI PC406-D PC406-DI Owner's Manual | 17

4. Connections

Table of Contents

Pc406-d Pc412-di Pc406-di