Syslog - Planet Networking & Communication IPM-16120 User Manual

Parameters
sysName
sysContact
sysLocation
Parameters
Host
SNMP Trap Port
Authentication
String
SNMP Test
4.2.5

Syslog

Remote Power Manager will send out text message to syslog receiver (syslog server). Please do as
follows:
Parameters
Host
Port
Syslog Test
The name displayed on SNMPAgent.
The contact displayed on SNMPAgent.
The location displayed on SNMPAgent.
The Host IP address of SNMP Trap.
The phase connects to SNMP Trap. Default is 162.
The authentication string to access SNMP Trap.
After setting up the above info, you can send a test mail to make sure
this function is normal.
Enter Syslog Server Host IP.
Enter Connect Port for Syslog Server. Default is 514.
After setting up the above info, test it to make sure this function is
28
- -
IP-based 16-port Metered Power Distribution Unit
Description
Description
Description
IPM-16120