System; Network Setting - Planet Networking & Communication IPM-16120 User Manual

Power (watt)
Kilowatt Hour (kWh)
Overload Current
High Alarm (Current)
6 Low Alarm (Current)
High Alarm (Device
Temperature)
Low Alarm (Device
Temperature)

4.2 System

On this web page, users can set Network, Email server, Message server, SNMP, SysLog, Peripheral
parameters, and other relevant data.
4.2.1

Network setting

This menu is mainly for setting the basic data of network.
IP-based 16-port Metered Power Distribution Unit
Displays the consumption power value of the current input
power.
Displays the consumption watt-hour of the device since
the last zeroing.
Inputs the current value of the overload power, alarms will
be given when the input power current exceeds this alarm
value.
Sets up the values of high infeed alarm. When the current
is higher than you set, the alarm will occur.
Sets up the values of low infeed alarm. When the current
is lower than you set, the alarm will occur.
Sets up the values of high infeed alarm. When the current
device temperature is higher than you set, the alarm will
occur.
Sets up the values of low infeed alarm. When the device
temperature is lower than you set, the alarm will occur.
22
- -
IPM-16120