Chapter 2 Hardware Interface; Physical Descriptions - Planet Networking & Communication IPM-16120 User Manual

Chapter 2 Hardware Interface

2.1 Physical Descriptions

Dimensions (W x D x H)
Weight
Front Panel
RJ45 Port
1
Alarm
2
3 LCD Panel
4 Five-sided Button
5 Power Outlet
6 Power Inlet
Circuit Breaker
7
Protection
8 Buzzer
RJ45 LED
9
748 x 43 x 43 mm
1.7kg (gross weight)
Enable user to configure the IP Metered PDU through a LAN or WAN.
Lights remaining lit: Alarm has occurred.
Slow flashing: There was current overloading.
Display current information, max. alarm current, device temperature and
network information.
Provides LCD switching panel info and setting parameters.
Please see below the Panel Operation for more understanding.
Connect a device to each power outlet to supply power to it.
Note: The max. output current is 16 amps.
Device power lead.
Prevents power overload and damage to devices when circuit breaker
protection trips. Press the button on the breaker protection to return to
normal operation after eliminating abnormal device power supply.
Buzzer will make a beep sound when alarm happens.
Link (Green):
Blink:
Network Speed
(Yellow):
Off:
12
-
IP-based 16-port Metered Power Distribution Unit
The port is successfully established.
The port is running at a speed of 100Mbps.
The port is running at a speed of 10Mbps.
-
IPM-16120