Installation Precautions; Hardware Installation - Planet Networking & Communication IPM-16120 User Manual


When the LCD menu shows network info, hold the five-sided button for 10 seconds until two
beeps sound to enter reset mode.

2.2 Installation Precautions


Please set the maximum power-off protection allowed by power circuit as per the rated current
information indicated on the device with reference to the local state rules, safety procedures and
disconnector deviation.

The unit can only be connected to a grounded power outlet or system.

Make sure the total current output of all the connected systems is within the rated current indicated
on the device.

The test results of this device may be inaccurate giving unstable power supply.

Avoid using this device in places near water or moisture environments.
In order to avoid a fire hazard or risk of electric shock, do not expose the product to
rain or moisture.

Use the attachments/accessories specified by the manufacturer only.

Please avoid any items or liquids entering the device because their contact with dangerous voltage
points or short-circuit parts may cause a fire or electric shock.

2.3 Hardware Installation

IP Metered PDU provides standard 0U rack for the installation of devices; for the installation of the
device on the rack, you can install it on the top or bottom of the rack.
IP-based 16-port Metered Power Distribution Unit
14
- -
IPM-16120