Tooth ® Audio Device Has Been Stopped - Mercedes-Benz Audio 20 Operating Instructions Manual

B
Name of the connected Bluetooth
device (example)
Options menu
C
Some mobile phones only support two Blue-
®
tooth profiles at the same time (e.g. Hands-
Free Profile for Bluetooth
®
tooth audio profile for audio streaming). If you
®
activate Bluetooth audio mode and there is
already an active Internet connection, this can
cause the connection to be terminated.
Switching to Bluetooth
Press the Õ button.
X
To select Bluetooth Audio
X
and press the controller.
The multimedia system activates the Blue-
®
tooth audio device. The basic display then
appears. Playback starts.
i
®
If the Bluetooth audio device connected
supports metadata and corresponding data is
available, then the artist, track and album
name can be displayed.
Starting/stopping playback
To select Start playback Ì: turn and
X
press the controller.
Playback starts. Ë is selected.
To stop playback: select Ë.
X
A message appears. Ì is selected.
To continue playback: select Ì.
X
A message appears. Ë is selected.
Starting playback if the Bluetooth
audio device has been stopped
During the search for mobile phones, the con-
nection with the Bluetooth
minated ( page 39). In the Bluetooth
Y
basic display ( page 87) you will see the
Y
Bluetooth Audio Device Connected
sage and the Connect Last Used Player
menu item cannot be selected.
When the search is finished, the Bluetooth
audio device can be reconnected.
®
audio
®
telephony and Blue-
®
audio
in the menu: turn
®
®
audio device is ter-
®
audio
No
mes-
®
Bluetooth
To select Start playback Ì: slide 6
X
and press the controller.
Playback resumes from the beginning.
To select Connect Last Used
X
press the controller.
Depending on the Bluetooth
used, playback starts immediately or you
must start playback manually.
In this case, you will see the
Audio Device Paused
i
If there is an Internet connection and the
mobile phone that is connected only supports
®
two Bluetooth profiles at the same time, the
Internet connection is interrupted.
Selecting a track
The function is not supported by all Bluetooth
audio devices.
Some mobile phones impair function with
regard to the following criteria:
the number of tracks that can be selected
R
the time period until the next or previous track
R
is played
Use the multifunction steering wheel to
X
switch to the media menu in the on-board
computer (see the vehicle Operator's Man-
ual).
To skip forwards or backwards to a track:
X
press the 9 or : button on the multi-
function steering wheel.
Rapid scroll: press and hold the 9
X
or : button on the multifunction steering
wheel until the desired track is reached.
If you press and hold the 9 or : but-
tons, the rapid scrolling speed increases after
a short time.
Further ways to select tracks (
i
In rapid scroll, track names are not shown,
but instead only Track 1, Track 2 etc. The
playback times for the tracks played are not
displayed. This is available as an optional
function starting with AVRCP Version 1.3.
There is also no music search option available
®
with Bluetooth Audio.
®
audio mode
Player:
®
audio device
Bluetooth
message.
®
page 81).
Y
Z
87