Mercedes-Benz Audio 20 Operating Instructions Manual page 33

Massage the entire back, rising waves, sooth-
ing downward movements
Activating Massage
R
Mobilizing massage and rising and descend-
ing dynamic waves
Classic Massage
R
Single and twin waves moving upwards
across the entire back
Mobilizing Massage
R
Mobilization via stronger single and twin
waves moving upwards across the entire back
Selecting a massage program
Call up the seat functions (
X
To select Massage: turn and press the con-
X
troller.
To select a seat: slide 1 the controller.
X
To select massage programs: turn and press
X
the controller.
The massage program runs for approximately
15 to 25 minutes, depending on the setting.
To exit the menu: press the % button.
X
Seat heating balance
The balance function controls the distribution of
heat for the seat backrest and seat cushion.
The balance function influences the currently
set heating level of the seat heating (see the
vehicle Operator's Manual).
Call up the seat functions (
X
To select Seat Heating
X
press the controller.
To select a seat: slide 1 the controller.
X
To change the setting: turn the controller.
X
You will see the changes you have made in the
settings display.
The settings represent the following:
0 — the backrest and seat cushion are evenly
R
heated according to the setting selected with
the seat heating button.
1 to 3 — the heat output to the seat cushion is
R
reduced one level at a time.
-1 to -3 — the heat output to the backrest is
R
reduced one level at a time.
To exit the menu: press the % button.
X
X
X
X
X
X
X
page 30).
Y
The 360° camera surveys the vehicle surround-
ings and assists you, for example when parking
or at exits with reduced visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. Make sure
that no persons or animals are in the maneu-
vering range.
Further information on the 360°camera can be
found in the vehicle Operator's Manual.
page 30).
Y
The 360° camera image can be displayed if:
Balance: turn and
R
R
X
X
You will see the previous view on the display if,
when the function is switched on:
R
R
R
Resetting all adjustments
Call up the seat functions (
Select a seat.
To select Reset: turn and press the controller.
To select a seat: slide 1 the controller.
To reset: press the controller.
A prompt appears.
To select Yes or No: turn and press the con-
troller.
If you select No the process is canceled.
After selecting Yes all seat adjustments are
reset to the default values (factory setting).
360° camera
General notes
Displaying the 360° camera image
your vehicle is equipped with a 360° camera
the 360° Camera function is activated; (see
the vehicle Operator's Manual)
Press Vehicle in the main function bar.
The vehicle menu is displayed.
Select 360° Camera.
The 360° camera image appears in split-
screen mode.
you turn the SmartKey to position 1 in the
ignition lock
you select transmission position P
when you are driving at moderate speeds
360° camera
page 30).
Y
Z
31