Table of Contents
Advertisement
hours of operation.
Follow all applicable safety and caution statements found in the unit operating manual or engine service/maintenance
manual before performing any maintenance checks or service.
This maintenance schedule reflects the minimum tasks that need to be accomplished to verify the unit remains
operational. Some of the tasks can be performed by an authorized operator and others must be performed by an
Independent Authorized Service Dealer.
Note: An authorized operator is one who has been trained by an Independent Authorized Service Dealer in the
proper operation and inspection of this unit.
Use the schedule in the following table as a guide for regular maintenance intervals. For additional maintenance
information, see the OEM engine manual.
Walk Around Inspection
Check Oil Level
Check Coolant Level
Check Belts
Check Electrical Wiring
Inspect Radiator for Signs of Obstruction or Damage
Inspect Gas Piping and Hoses for Leaks and Damage
Sample Engine Oil
Change Oil, Replace Oil Filters
Inspect/Replace Crankcase Ventilation Filters
Check All Flex Hoses
Check and Adjust Intake and Exhaust Valve Clearance
Inspect Coolant Hoses
Visually Inspect Air Filter (replace if necessary)
Inspect Shutoff Valve for Leaks and Closing
Check Engine Air Induction for Leaks
Drain LPL Vaporizer Oil Build Up
Inspect Exhaust/Catalyst
Service Batteries
Replace Spark Plugs
Check Battery Connections and Disconnect Switch
Lubricate Trailer Leveling Jacks
Check Engine and Generator Mounts
Drain, Flush and Refill Cooling System
Replace Ignition Coils
35319 C
Table 4 - Basic Maintenance Schedule
Item
MGG155/210 Operating Manual
First
Every
50 Hours
Daily
750
(Break In
Hours
Period)
*
Maintenance
8000
Hours
(Annually)
35
Advertisement
Table of Contents
Troubleshooting
