Download Print this page
Generac Power Systems MPSG350 Specifications
Generac Power Systems MPSG350 Specifications

Generac Power Systems MPSG350 Specifications

350 kw modular power system

Advertisement

Quick Links

Modular Power
System (MPS)
Standby Power Rating
350 KW 60 Hz
Diesel Generator
GEN
Circuit
Breaker
Contactor
UTILITY
Transfer Sw
W/ Integral
Control
Power Manager Integrated Controller Layout
FEATURES
n
The Generac Modular Paralleling system utilizes
multiple small generators in a side by side parallel
arrangement to achieve a larger combined power
output.
n
The proven 13.3 liter Generac generators can be
combined up to 10 units to provide from 300 kW to 1
megawatts of reliable power.
n
Paralleling System Features. The paralleling function is
controlled by Generac's field proven Power Manager
Control utilizing contractor switching technology
resulting in cost effective reliable paralleling. The MPS
control system provides automatic synchronization,
adjustable load sharing between generators, reverse
power protection and load shedding contacts.
n
The optional cable interconnect cabinet is furnished with
bus bar and lugs to allow easy cabling between the
multiple gensets. Recommended for 3 or more gensets.
n
The Generac "Power Manger Generator controller"
provides complete engine monitoring and control along
Powered with Generac's 13.3 Natural Gas Engine
Diesel Generator
GEN
Circuit
Breaker
Contactor
Distribution
Cab
Diesel Generator
GEN
Circuit
Breaker
Contactor
Control Wires
Distribution
Cab
UTILITY
ATS
Power Manager System Controller Layout
with alarm function and communication ability via a
RS232 with a modem link to Generac's Genlink
software or Modbus control. A RS485 link is also
available.
n
Flexibility. The Modular Power systems flexibility allows
for a wide variety of configurations, including single or
multiple automatic transfer switch arrangements roof
application where better weight distribution is required
and areas with specific height or depth limitations.
Since MPS gensets need not be located together, space
can be utilized wherever it is available. Smaller units
are also easier to transport and place on the jobsite.
n
Redundancy. N+1 means greater reliability with MPS.
Backup power during scheduled maintenance.
Simplified service which reduces maintenance costs.
n
Single source service response from Generac's dealer
network provides parts and service support for the entire
unit. You are never on your own when you own a
Generac Power System
MPSG350
350 kW
Prime Power Rating
280 KW 60 Hz
Diesel Generator
GEN
Circuit
Breaker
PMSC
Contactor
Controller
Cabinet
Distribution
Cab
UTILITY
ATS
®

Advertisement

loading

Summary of Contents for Generac Power Systems MPSG350

  • Page 1 The proven 13.3 liter Generac generators can be combined up to 10 units to provide from 300 kW to 1 megawatts of reliable power.
  • Page 2: System Description

    RS485 Data Highway Ratings definitions : See Generac Power Systems "Power Rating Guidelines" for specific definitions and application guidelines of the Standby Power, Prime Power and Continuous Power Ratings. Prime Power is not available at this time for MPS units.
  • Page 3 * Note: Temperatures will require necessary derates be applied. Unless otherwise noted, all data at 480 volt wye - 1.0 PF. 350 kW Rated Amps 1214 1 - 200 kW, 1 - 150 kW 208 Volt Parallel Wye Network 1-200 kW plus 1 - 150 kW 520 mm PMG Generac Alternators 0.16 0.23 0.07 0.18 0.0078 0.5%...
  • Page 4 Power Manager Integrated Control Transfer Switch The PM-IC is part of the Generac Transfer Switch A connection box for the power wires is an option. 1 - 200 kW 13.3 Liter + 1 - 150 kW 13.3 Liter Gas Powered Generator Modules Standard Enclosed units shown.