Assembly; Fitting And Using The Tools - Morphy Richards 48950 Manual

48950MCZ 11/1/07

Assembly

Setting up
1 Ensure the appliance is unplugged
from the mains.
2 To fit the bowl, align the handle as
shown. Turn the handle clockwise
until it is clicked into place A.
(Note, the handle can be located for
left hand ⁄ or right hand ¤ use).
3 Fit the detachable drive shaft over
the induction motor drive B.
4 Select the appropriate blade and fit
over the detachable drive shaft,
referring to 'fitting and using the
tools' for details.
5 Fit the lid to the processor bowl by
aligning the indicator on the lid to
the right hand side of the handle
and then rotate clockwise, until the
lid clicks firmly into place C.
6 Ensure that both food pushers are
in place before processing. They
should only be removed to insert
food D.
FITTING AND USING THE
TOOLS
In general, all attachments (with the
exception of the mini processor
bowl and small blade) which are
fitted within the processor bowl
must be firmly attached to the
detachable drive shaft. Always
adjust the attachments until you are
sure that they are correctly fitted.
Detachable drive shaft
Insert attachments over the top of
the detachable drive shaft and
ensure that they are securely
clicked into place. Then remove the
blade covers (if applicable), taking
care as the blades are sharp E.
Chopping blade
1 Fit the processor bowl as detailed
previously.
2 Fit the chopping blade over the
motor drive, and fit firmly into
place F.
Warning: Use extreme caution -
the blades are sharp. Always
handle the chopping blade by its
central plastic section.
3 Place the food into the bowl.
17:52 Page 7
A
4 Fit the lid and click into place as
detailed in the 'Setting up' section.
5 Plug in the processor and switch to
speed 1 G. If the processor does
not come on, check that processor
lid is correctly fitted.
Warning: For safety, always use
the food pusher when putting
food into the feeder tube. Never
feed by hand or utensils.
6 For large foods feed through with
the large food pusher. The small
pusher should be locked into place
when using. When processing small
pieces of food, unlock and use the
small food pusher, leaving the large
pusher in place in the lid H.
WARNING: Do not use the small
food pusher without the large
food pusher being in place in
the lid feed tube.
7 When the processing is complete,
remove the blade from the bowl
before removing the processed
food.
Dough blade
1 Fit the processor bowl into place as
described in 'Setting up'.
2 Place the dough blade on the
detachable drive shaft. Then place
the ingredients in the bowl.
3 Fit the lid and slot into place, make
sure that it clicks.
4 Now plug in the processor.
5 Turn the processor on and operate
until the dough has formed into a
small ball.
6 Remove the blade from the bowl
before removing the dough.
www.morphyrichards.com
⁄
¤
B
g
C
D
E
F
G
H
7