HP AlphaServer ES80 Installation Manual page 59

~GRP-W-(grp_Probe) Use Set Membership -add -ca 1 -dr 6 PBM
6 pbm
~GRP-E-(grp_IAmAlive) MISSING NEIGHBOR timeout from Cab: 1, Drawer: 7
Cab Drw Module
0 0 MBM
0 1 MBM
0 2 PBM
1 3 PBM
1 4 PBM
1 5 PBM
1 6 PBM
1 7 ~GRP-W-(grp_IAmAlive) Leaving Group ID: 100010a.9
PBM ~GRP-W-(grp_Crea107fe0ate) Joined Gr oup ID: 100000a.b
10.254.7.1
MBM> [2003/07/16 07:29:11]
~REC-W-(trecTask) Server management group is transitioning.
interrupt: ~GRP-I-(interrupt), GROUP HAS FORMED ID:100000a.b
interrupt: ~GRP-I-(interrupt), GROUP IS STABLE ID:100000a.b
[2003/07/16 07:29:34]
~REC-W-(trecTask) Server management group is stable.
Restore power to the system. You will receive a series of error messages. This is to be
expected, since the console is identifying a component not yet configured into the system
network.
1. After you return power, the system begins its software power-up. Server management
discovers any newly added drawers and reports them to you. In this case, server
management has discovered a drawer in cabinet 1, drawer 6.
2. Server management tells you what command to run to include this newly discovered
drawer.
3. The system continues to power up. All during its power-up sequence it continues to
broadcast the information shown at
include it in the group.
4. Type in the command set membership –add –ca 1 –dr 6 PBM. In this case,
the system continues to broadcast messages while you type in the command.
5. When this message appears, server management has accepted the command.
MicroID IP Address
100000a 10.0.0.1
100010a 10.1.0.1
2fe0a 10.254.2.0
103fe0a 10.254.3.1
104fe0a 10.254.4.1
105fe0a 10.254.5.1
106fe0a 10.254.6.1
TRUE
and
In Group
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
until you provide manual intervention to
Configure and Troubleshoot 4-3