Advertisement
1. Remove the Existing Toilet
Turn off the water supply.
Flush the toilet, then sponge out all remaining water from the tank.
Disconnect the supply shut-off valve (if present), and remove the old
bowl and tank.
CAUTION: Risk of hazardous gases. If the new toilet is not
installed immediately, temporarily stuff a rag in the closet flange.
2. Prepare the site
Cut out the template where indicated for the wall line.
Position the template on the floor to ensure the template against the
wall.
Trace around the bowl outline on the floor with a pencil.
Mark the mounting hole centerline on the floor.
Kohler Co.
Template
3
1066117-X2-B
Advertisement
