Electromagnetic Fields (Emf) - Philips S1223 Manual

8
English

Electromagnetic fields (EMF)

General
Charging
- Water may drip from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the
shaver.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charge the appliance before first use and when
the display indicates that the battery is almost
empty.
When you charge the appliance for the first time or
after a long period of disuse, let it charge until the
charging light lights up continuously.
Charging takes approx. 8 hours. A fully charged
appliance has a cordless operating time of up to
40 minutes.