Installation - McIntosh C2700 Owner's Manual

Installation

The C2700 can be placed upright on a table or shelf,
standing on its four feet. It also can be custom in-
stalled in a piece of furniture or cabinet of your
choice. The four feet may be removed from the bottom
of the C2700 when it is custom installed as outlined
below. The four feet together with the mounting
screws should be retained for possible future use if the
C2700 is removed from the custom installation and
used free standing. The required panel cutout, ventila-
tion cutout and unit dimensions are shown.
Always provide adequate ventilation for your
C2700. Cool operation ensures the longest possible
operating life for any electronic instrument. Do not
install the C2700 directly above a heat generating
component such as a high powered amplifier. If all
the components are installed in a single cabinet, a
quiet running ventilation fan can be a definite asset in
maintaining all the system components at the coolest
possible operating temperature.
A custom cabinet installation should provide the
following minimum spacing dimensions for cool
operation.
Allow at least 6 inches (15.2cm) above the top, 2
inches (5.1cm) below the bottom and 1 inch (2.5cm)
on each side of the Preamplifier, so that airflow is not
obstructed. Allow 20 inches (50.8cm) depth behind the
front panel. Allow 1-7/16 inch (3.7cm) in front of the
mounting panel for knob clearance. Be sure to cut out
a ventilation hole in the mounting shelf according to
the dimensions in the drawing.
6
C2700 Front Panel
Custom Cabinet Cutout
Cabinet
Front
Panel
Opening
for Ventilation
C2700 Side View
in Custom Cabinet
Support
Shelf
C2700 Bottom View
in Custom Cabinet
1 "
-1/16
2.70cm
Note: Center the cutout Horizontally
on the unit. For purposes of
clarity, the above illustration
is not drawn to scale.
17- "
3/16
43.66cm
USB 35%
DSD256
6"
15.2cm
Cutout Opening for Custom Mounting
Cutout Opening for Ventilation
Chassis
2 "
-1/4
Spacers
5.72cm
9 "
-1/8
23.18cm
15"
Cutout 38.10cm
38.10cm
Opening
for
Ventilation
12 "
-5/16
31.27cm
Installation
6- "
5/8
16.84cm
15"