Alignment Instructions; Service Mode; Microcontroller Configuration; Tv Set Alignment 5~6 - Daewoo DTC-14D9T Service Manual

ALIGNMENT INSTRUCTIONS

Microcontroller configuration : Service mode
To switch the TV set into service mode please see instruction below.
1 - Select pr. number 91
2 - Adjust sharpness to minimum and exit all menu.
3 - Quickly press the key sequence : RED - GREEN - menu
4 - List of service manual item
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
To exit SERVICE menu press menu key or Std By key.
In Service Mode press "OK" to the microcontroller i.e. the I2C bus is free and the set can be controlled by external
equipment.
Press "OK" again to allow the microcontroller to control the set again
TV set Alignment
1 - G2 alignment
- Set TV in NORMAL I mode.
- Receive the RETMA PATTERN (or color bar).
- Press the SVC button in Service Remocon.
- Press the Screen button in Service Remocon.
- Turn round the screen volume of FBT until the horizontal line of screen disappear.
- Press the Screen button to exit Screen mode.
2 - White balance
- Select a dark picture and adjust Black G and Black R to the desired colour temperature.
- Select a bright picture and adjust WP Red, WP Green, WP Blue to the desired colour temperature.
Item
AGC
Black R
Black G
WR Red
WP Green
WP Blue
H Shift
V Slope
V Amp
S Correct
V Shift
Sub Bright
BRM
CH Lock
MAX Vol
AV Start
Key Lock
PSNS Mode
5