Table of Contents
Advertisement
Mounting
4.3 Installing the enclosure outdoors
4.3
Installing the enclosure outdoors
Under normal environmental conditions, degree of protection IP65 prevents ingress of dust
or water into the interior of the enclosure. Take the following additional protective measures
depending on the environment of the installation location:
● Avoid subjecting the enclosure permanently to water (for example, snow).
● Remember that direct sunlight can cause excessive temperatures in the interior of the
● Remember that opening the enclosure at ambient temperatures below 0 °C can damage
● If you want to use the device in an aggressive environment, check whether this is
18
enclosure. In locations where this can occur, provide additional protection with some form
of roofing.
the seal.
possible with the material in question.
Wall-mount enclosure 6DL2804-0xxxx
Hardware Installation Manual, 08/2009, A5E00378691N-02
Advertisement
Table of Contents
