To Set Functions In Configure Mode; Configure Mode Options; Hrm Settings - Timex W-188 User Manual


S+D SETTINGS: Speed and distance settings affect the
Watch's response to data received from the GPS-3D Sensor.

ALTITUDE SETTINGS: Altitude settings configure target
altitude and set smoothing and ascent rate calculations.

HANDS-FREE SETTINGS: Hands-free settings provide
options to configure the Watch to operate automatically in
conjunction with the GPS-3D Sensor.

WATCH SETTINGS: Watch settings provide options for
customizing the general operation of the Watch, including hiding
data or modes.

UNIT SETTINGS: Unit settings allow you to determine
distance (for example miles versus kilometers) and heart rate
(beats versus percentage) display units.

TO SET FUNCTIONS IN CONFIGURE MODE

Unlike other setting functions in the Watch, the setting groups in
Configure Mode are arranged in a menu hierarchy.
1. Press MODE until Configure Mode appears.
2. Press ▲ (DISPLAY) or
next or previous setting group.
3. Press SELECT (SET/FORMAT) to enter a setting group.
4. Press (DISPLAY) or
▲
through the options within a setting group.
58
▼ (STOP/RESET) to move to the
(STOP/RESET) to navigate
▼
5. Press SELECT (SET/FORMAT) to select an option within a
setting group. This may allow you to change a setting or take
you to another level.
+
6. Press (DISPLAY) or
within a setting group.
7. Press DONE (MODE) when you have finished setting an
option within a setting group.
8. Press DONE (MODE) again to return to the setting group
level.

Configure Mode options

HRM SETTINGS

Lower target
zone limit
Alert type
-
(STOP/RESET) to set the option
Selected zone
Upper target
zone limit
59