Ricoh Color Laser AP206 Setup Manual page 32

Installing Options
D
Remove the screw and securing
bracket from the paper feed unit.
2
E
Turn off the printer's power
switch and remove all cables and
cords from the printer.
F
Remove the paper cassette from
the printer.
G
Remove the connector cover from
the printer.
Note
❒ Keep the removed connector
cover. When you detach the pa-
per feed unit, re-attach the con-
nector cover to the printer.
22
H
Set the locking plate on the paper
feed unit to the "RELEASE" posi-
tion.
ZDGP090J
Important
❒ Be sure to set the locking plate
to the "RELEASE" position. If
you place the printer on the pa-
per feed unit with the locking
plate set to the "LOCK"posi-
tion, the printer or the paper
feed unit may be damaged.
I
Lift the printer using the inset
grips on both sides of the printer.
ZDGP100J
Important
❒ It is recommended that at least
two persons are used to lift the
printer.
ZDGP110J
ZDGP120J