Siemens SIMATIC SCALANCE W788C-2 Series Operating Instructions Manual page 29

Installing on the DIN rail
The following figure shows the W7x8 mounted on a DIN rail. Follow the steps outlined below:
1. Place the device on the upper edge of the DIN rail (position A).
2. Pull the spring-mounted DIN rail slider (position B) down and press the device against the
DIN rail until it locks in place.
Figure 4-5
SCALANCE W788C-2
Operating Instructions, 07/2019, A5E03692120-14
Installing on a DIN rail
Mounting
4.5 Installing on a DIN rail
29