Installing On The S7-1500 Standard Rail_W7X8_11N - Siemens SIMATIC SCALANCE W788C-2 Series Operating Instructions Manual

4.4

Installing on the S7-1500 standard rail_W7x8_11n

Follow the steps below to install the SCALANCE W7x8 on a vertical S7-1500 rail:
1. Place the device on the upper edge of the S7-1500 standard rail (position A).
2. Screw the device to the rail using the supplied screw (position B).
Figure 4-3
SCALANCE W788C-2
Operating Instructions, 07/2019, A5E03692120-14
Installing on an S7-1500 standard rail
4.4 Installing on the S7-1500 standard rail_W7x8_11n
Mounting
27