Hach Flow Cell FC 48/10 USC Quick Start Manual page 6

FlowCell FC 48/10 USC
1.3.4 Chemical and Biological Safety
Chemical or biological hazards. If this instrument is used to monitor a
treatment process and/or chemical feed system for which there are regulatory
limits and monitoring requirements related to public health, public safety, food
or beverage manufacture or processing, it is the responsibility of the user of
this instrument to know and abide by any applicable regulation and to have
sufficient and appropriate mechanisms in place for compliance with applicable
regulations in the event of malfunction of the instrument.
Normal operation of this device may require the use of chemicals or samples that
are biologically unsafe.
• Observe all cautionary information printed on the original solution containers
and safety data sheets prior to their use.
• Dispose of all consumed solutions in accordance with the local and national
regulations and laws.
• Select the type of protective equipment suitable to the concentration and
quantity of the dangerous material being used.
1.3.5 Product overview
The FlowCell FC 48/10 USC is suitable for NX7500 optical sensors with a path
length of up to 10 mm. There are two versions available:
•
LXZ529.99.0002A without panel
• LXZ529.99.0003A with panel
FlowCell with integrated ultra sonic cleaning: In addition to the standard
FlowCell, Hach now also offers an ultrasonic FlowCell which combines the
bypass-installation with direct cleaning.
Fouling on the measurement windows can be prevented by the use of ultrasound.
The condition of the optical path can be monitored at any time through the
monitoring window and the lighting unit.
D A N G E R
Figure 1
FlowCell FC 48/10 USC
English 5