Safety 1st Grow and Go 3-in-1 Instructions Manual page 26

6. Hook LATCH to Vehicle
Anchor in Seat Bight
7. Tighten Belt
Place knee in child restraint.
Firmly push down while pulling
free end of belt to tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
8. Tighten Tether
With knee still in child restraint,
push firmly on the back of the seat
and tighten tether strap.
45
4358-6653 Grow and Go 3 in 1.indd 51-52 4358-6653 Grow and Go 3 in 1.indd 51-52
9. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5
cm), try reinstalling the child
restraint, try another seating
location, or try using the vehicle
belts.
To Release LATCH
Remove child from child restraint.
Remove tension from LATCH belt
by pushing down on side of child
restraint with LATCH adjuster. Then
press adjuster button to loosen belt.
Unhook LATCH from bar by
squeezing spring lever, pushing hook
back into the seat bight and twisting.
Then pull it out of the vehicle seat.
Store LATCH when not in use. See
page 28.
4/15/15 8:48 AM 4/15/15 8:48 AM
46