Connecting An Ipod/Iphone - Alpine UTX-A09 Operating Instructions Manual

iPod/iPhone (optional)

Connecting an iPod/iPhone

An iPod/iPhone can be connected to the rear USB terminal of this unit by using the Interface cable for iPod (supplied with iPod/iPhone).
Notes
• Only the rear USB terminal supports iPod/iPhone connection. Do not connect an iPod/iPhone to the front USB terminal of this unit.
• To guarantee normal operation of this unit, do not connect a mobile phone or other charging device to the front USB terminal when an
iPod/iPhone is connected.
• Internet and telephone functions of the iPod touch or iPhone, etc can also be used while connected to this unit. However, using these
functions will stop or pause the currently playing songs.
Stop using any application or telephone function, and then resume audio playback on the device used.
About iPod/iPhone models usable with this unit
• Confirmed devices specially made for iPod. Correct function of earlier versions cannot be guaranteed.
iPod touch (6th generation): Ver. 11.0.3
• Confirmed devices specially made for iPhone. Correct function of earlier versions cannot be guaranteed.
iPhone 7 Plus: Ver. 11.0.3
iPhone 7: Ver. 11.0.3
iPhone SE: Ver. 11.0.3
iPhone 6s Plus: Ver. 11.0.3
iPhone 6s: Ver. 11.0.3
iPhone 6s Plus: Ver. 11.0.3
iPhone 6: Ver. 11.0.3
iPhone 5s: Ver. 11.0.3
iPhone 5c: Ver. 11.3.3
iPhone 5: Ver. 11.3.3
• This unit does not support video playback from iPod/iPhone.
Playback
1
Press to switch to the iPod mode.
2
Press or to select the content you want to play.
Pressing and holding
3
To pause playback, press
or will skip backward or forward.
.