Using The Tools - Dyson DCO7 Owner's Manual

16831_CAN_DCO7_OPS_WARR.qxd 30/5/07

Using the tools

Choosing the right tool
The tools allow you to clean
surfaces above the floor and
to reach hard to clean areas.
Ensure the machine is in an
upright position before
using tools.
A Brush tool – with soft bristles
to dislodge dust and cobwebs.
The brush head twists to make
cleaning easier.
B Stair tool – with velour strips
to pick up hairs and an
agitating edge to lift the
carpet. The tool channels
airflow downward for better
pick-up without sticking to
upholstery. The head twists
to make cleaning easier.
C Crevice tool – reaches deep
into nooks and crannies.
Ideal for cleaning along
baseboards and in tight
corners. The tool channels
airflow downward for better
pick-up without sticking.
D Mini turbine head – the air
powered brushbar ensures
effective removal of pet hair
and fibers in confined spaces
such as stairs, upholstery
and in the car. Supplied with
certain models only, or
available as an accessory for
other models – contact the
Dyson Helpline or
www.dyson.com to order.
E Floor tool – to reach under
furniture. Adjustable for hard
floors or carpets. Maintains
perfect contact with the floor
to optimize pick-up. Supplied
with certain models only, or
available as an accessory
for other models – contact
the Dyson Helpline or
www.dyson.com to order.
Dyson Helpline contact us on
8
09:44 Page 8
A
B
C
D
E
How to clean your tools
The brush tool, stair tool and
crevice tool may be washed in
warm water with a detergent.
Rinse and air dry thoroughly
before using. You may wipe the
outside of the floor tool or turbo
tool/mini turbine head with a
damp cloth, but do not
submerge in water. Do not
attempt to clean any tools when
they are attached to the machine.
1-877-397-6622
2
1
Attaching tools
1 Press the quick-draw hose
release to detach the hose/
wand from the machine.
2 Slide the wand to the end of
the hose.
All Dyson tools can be used
in the following ways:
Wand mode
Slide back the wand cap and fit
one of the tools directly on to the
wand handle.