Dyson DCO7 Owner's Manual page 13

16831_CAN_DCO7_OPS_WARR.qxd 30/5/07
A
B
Shroud cleaning
(when necessary)
To remove any build-up of lint or
large dust particles on the shroud:
Ensure the Clear bin is empty
TM
and the Clear bin base is open.
TM
A Press the bin release catch to
remove the Clear bin.
TM
B Clean the shroud with a cloth
or dry brush to remove the
lint and dust.
CAUTION
• Do not use the machine
without the Clear bin in place.
TM
09:44 Page 13
C
D
To reassemble the Clear bin,
TM
place on the floor with the
Clear bin base closed.
TM
C Holding the carry handle,
put the cyclone assembly
inside the Clear bin, line up
TM
the front and rear catches
and push down to click the
catches into place.
D Ensure the Clear bin is
TM
secure before replacing on
the machine.
Clear bin cleaning
TM
(optional)
• You may rinse the Clear bin
TM
with water. Rinse only the
Clear bin – do not rinse the
TM
inner cyclone, shroud or cones.
CAUTION
• Do not use detergents.
• Do not immerse any other part
of the machine in water.
• Ensure the Clear bin is
TM
completely dry before
replacing.
www.dyson.com
13