16831_CAN_DCO7_OPS_WARR.qxd
30/5/07
U-bend airway inspection
• Tilt the machine forward
to slide out the U-bend
airway inspection.
• Check inside for blockages.
09:44
Page 17
Airway inspection valve
• Squeeze the valve release
catches to remove the airway
inspection valve.
• Check inside for blockages.
CAUTION
• The ratchet noise warns that
the brushbar is obstructed.
Disconnect the machine from
the electrical outlet before
removing the obstruction.
1
2
Brushbar
Lay the machine on its front.
1 Undo the colored soleplate
fasteners using a coin and
remove the soleplate.
2 Clear the brushbar
obstruction, carefully cutting
away any threads with a pair
of scissors.
Replace the soleplate and tighten
the fasteners.
CAUTION
• Make sure all parts have
been replaced securely
before using your machine.
www.dyson.com
17