Drying-heater Unit Operation
What to Do First
When installation of this machine is complete, select "ENABLE" in the printer's [OPTION DRYER] menu. If
"ENABLE" is not selected, the temperature of the drying-heater unit will not increase even if the drying-
heater unit power switch is turned on.
手順
A
Press
[MENU].
B
Press [ ] several times to display the screen shown below.
Press
.
[
]
MENU
HEATER MENU
C
Press [ ] several times to display the screen shown below.
Press
.
[
]
HEATER MENU
OPTION DRYER
D
Use
to select "ENABLE."
[ ] [ ]
Press
.
[ENTER]
OPTION DRYER
DISABLE ENABLE
E
Press [MENU], then
Removing This Machine
Select "DISABLE" in the [OPTION DRYER] menu and switch off the power before removing this machine.
32
to go back to the original screen.
[
]